Recently, our lab conduct another test is to use Intel Coffee Lake processor to be heated from -35 to 0 degree c. In most of the industrial and military applications, cpu and pch chip shut down while in minus temperature is very common issue. In past, only solution is use film heater but another issue is how much wattage we need in real applications. Now, MIYO Technology lab finish a complete test that use heater with 2-4-6-8 w/cm.sq.  This 4 type different heat density all can heat up chip from -35 to zero degree c. In the test, we give more detail test result with heating time. Please refer to below pictures that show heat density and time needed while heat up. For more question, we contact with us.

Hybrid and battery driven engine had become giant wave trend in automobile industrial field. This newly applications will bring battery play a important role of power supply, but so far as we know current power li-on technology will facing battery output lost up to 40-50% while in minus degree temperature. Thus, there are more and more battery need to have heater design in. Battery with heater design in can largely increase battery performance due heater can provide pre-heat function to avoid battery temperature in minus temperature. MIYO's battery heater solution which can provide film heater all were customized to your battery's dimension, voltage, and wattage. Our customer will have our special design heater with adhesive stick onto battery to having heat function. We can also provide thermal fuse integrated with heater pattern to provide safety design if heater were over heated situation or out of control. If you are seeking similar battery heating solution, MIYO engineer are very welcome to provide you suggestion and solutions. Please mail to us： miyo@miyo.com.tw  for more possibility.

For most electricity device working in low temperature facing a problem is my device part will shutdown as -Chip set down -Panel unable to display or touching function down -Hard drive down -Motor zoom in/out function fail When these problem happened, engineer need to find higher specification equipment that means cost increase a lot. Now, MIYO Taiwan film heater can solve your problem by introducing film heater by -Polyester film -Polyimide film -Silicone Rubber film  Three substrate film thickness from 0.2mm to 1.5mm gives your equipment more robust while facing problems. Contact us to find solutions：miyo@miyo.com.tw